產品簡介壓縮機應安裝在高于最高水位 1 米高的高架、有蓋和受保護的地方,。 固體體和顆粒不得吸氣,。 因此,建議將過濾器連接到入口,。 必須提供正確的電氣連接,,否則水可能會通過鼓風機吸入。 正確的旋轉方向由身體上的箭頭指示,。 整個空氣管道和軟管網絡必須從壓縮機向分銷商撤離,,以防止冷凝水中的水袋。 讓我們?yōu)槟姆趸瘓龌蝠B(yǎng)魚場制定精確詳細的報價,。 只需向我們發送一個尺寸的草圖,,顯示池塘和儲罐的布局和大小(長度,、寬度和深度),,以及環形壓縮機的計劃位置。 當擴散器的浸入深度小于上方時,,每小時容量會增加,。 可用型號為 0.25 kW 至 2.2 kW、三相或純交流電,,請根據要求指定,。 英文介紹The compressors should be installed in an elevated, covered and protected place up to 1 m above the maximum water level. Solid bodies and particles may not be aspirated. Hence it is advisable to connect a filter to the inlet. It is essential to provide correct electrical connections as water may otherwise be sucked through the blower. The right direction of rotation is indicated by an arrow on the body. The entire network of air pipes and hoses must drop away from the compressor towards the distributors to prevent water pockets from condensation water. Let us work out a precisely detailed offer for your hatchery or fish farm. Just send us a dimensioned sketch showing the lay-out and size (length, width and depth) of the ponds and tanks in relation to each other as well as the planned site of the ring compressor(s). When the immersion depth of the diffusers is less than above, the hourly capacity increases. Available variants from 0.25 kW to 2.2 kW, three-phase or pure alternating current, please specify on request. |
易操作2臂移動船塢除塵器(多功能工業抽氣機) |
2023-12-21
|
查看詳情 >> |
國產切割臺(30X 30MM) |
2023-09-25
|
查看詳情 >> |
CNC數控復合纖維織物切割臺(船塢自動化切割) |
2023-09-26
|
查看詳情 >> |
帆布制作縫紉機COASTAL-250(適合縫制針號為130-180的中等重量帆) |
2023-10-31
|
查看詳情 >> |
船塢剪刀ARAMID(適用于輕薄材料) |
2023-10-12
|
查看詳情 >> |